Specifying Options; To Send A Fax Document At A Specific Time - Xerox C3000 Facsimile Reference Manual

D
Specify settings according to the type of fax transmission.
Specify settings according to the type of fax transmission selected in step
as follows:
• If you selected [Fax], select a line or a protocol in the [Line:] list.
• If you selected [E-mail], select the [Do not use SMTP server] check box if you
want to bypass the SMTP server.
E
Click [Set as Destination].
The entered destination is added and appears in the [List of Destination:] box.
If you add a destination by mistake, click the wrong destination, and then
click [Delete from List].
F
To specify more destinations, repeat steps
Note
❒ For the maximum number of digits for a destination, see "Maximum Val-
ues".
Reference
p.64 "Sending Over a Fax Line"
p.67 "Sending by IP-Fax"
p.70 "Sending to an E-mail Address"
p.278 "Maximum Values"

Specifying Options

You can specify the following transmission options when sending a fax.
For details about transmission options, see the LAN-Fax Driver's Help.
• Sending at specific time
• Print Fax Header
• Attach a Cover Sheet
• 2 sided printing
• Preview
• Save as file
• Document Server

To send a fax document at a specific time

A
Click [Send Options].
The [Send Options] tab appears.
B
Select the [Sending at specific time] check box, and then specify a transmission
time.
Sending Fax Documents from Computers
B E
through .
B
,
6
249