Stamp - Xerox C3000 Facsimile Reference Manual

Stamp

When sending a fax document using the ADF, the machine can stamp a circle
mark at the bottom of the original. When sending a two-sided document, the
document is marked at the bottom of the front page and top of the rear page.
Important
❒ Stamp only works when scanning from the ADF.
A
Place the original, and then select the scan settings you require.
B
Press [Original Feed Type].
C
Press [Stamp].
To cancel the stamp, press [Stamp] again before pressing [OK].
D
Press [OK].
Placing Originals
1
45