Advertisement
Your Air Dream™ comes equipped with a U.L.
approved electric inflation pump. This pump
plugs into a standard 110v household outlet.
Position your sleep sofa so that accessing an
electrical outlet is convenient.
To inflate mattress:
1. Remove valve cap by simply turning cap counter clockwise.
2. After Cap is removed insert pump motor and turn clockwise until pump is
engaged. Allow pump to inflate for 25 seconds. Remove pump and replace
valve cap. (A motor pitch change occurs when mattress is full).
3. Replace valve cap after inflation and seal valve by turning clockwise.
To deflate mattress:
Completely deflate.
1. Open deflation valve by lifting valve latch
(Allow mattress to deflate before folding mechanism.)
2. Swing valve to closed position (do not lock) air trapped in mattress by locking valve
could cause damage. Do not lock valve while mattress is folded
DO NOT CLOSE DEFLATION VALVE
WHEN CLOSING THE SLEEPER MECHANISM.
Inflating and Deflating
Instructions
Patent Pending
Advertisement
Table of Contents
Related Manuals for Leggett & Platt Air Dream
Summary of Contents for Leggett & Platt Air Dream
- Page 1 Inflating and Deflating Instructions Patent Pending Your Air Dream™ comes equipped with a U.L. approved electric inflation pump. This pump plugs into a standard 110v household outlet. Position your sleep sofa so that accessing an electrical outlet is convenient. To inflate mattress: 1.
- Page 2 Replacement Valve Instructions Patent Pending 1. Open deflation valve by lifting up on valve tab. 2. Remove old valve by lifting the black plastic on the outer edge of the valve toward the center. The valve will then lift off. Now you are ready to install the replacement valve.
Need help?
Do you have a question about the Air Dream and is the answer not in the manual?
Questions and answers
My AirDream ultra mattress deflates when in use. How do I repair/replace it?
To replace a deflating Leggett & Platt Air Dream Ultra mattress valve:
1. Open the deflation valve by lifting up on the valve tab.
2. Remove the old valve by lifting it out.
No further valve replacement steps are provided in the context. If the mattress is deflating due to a faulty valve, replacing it as described may fix the issue. Seal the valve properly after inflation to prevent leaks. Do not lock the valve while the mattress is folded.
This answer is automatically generated