Changing The Network Connection Methods; Switching To Wired Lan; Switching To Wireless Lan - Epson SC-F500 Series User Manual

SC-F500 Series User's Guide
Changing the
Network Connection
Methods
The printer can connect to a wired LAN or a wireless
LAN. Furthermore, it also supports Wi-Fi Direct
(Simple AP) which allows a smart device or other device
to directly connect wirelessly with the printer even when
there is no wired LAN or wireless LAN environment.
The printer cannot connect to a wired LAN and wireless
LAN at the same time. A Wi-Fi Direct connection is
possible regardless of whether or not the printer is
connected to a network.
This section describes the procedures to use to switch
the connection method.

Switching to Wired LAN

A
Touch on the Home screen.
Note:
The shape and color of the icon differ depending on
the connection status.
"Home screen operations" on page 13
U
B
Touch Description.
C
Touch Wired LAN Connection Method.
D
Touch Start Setup.
The process to disable the wireless LAN
connection with the access point starts. Wait
until the The Wi-Fi connection is disabled.
message appears.
E
Connect your router and the printer with a LAN
cable.
See the following for the location of the printer's
LAN port.
"Back" on page 11
U

Changing the Network Connection Methods

74

Switching to Wireless LAN

The SSID (network name) and password of the access
point to which the printer is to be connected are
required. Confirm them in advance. The printer can be
connected to a wireless LAN while the LAN cable is still
connected.
Note:
If your access point supports WPS (Wi-Fi Protected
Setup), the printer can be connected using Push Button
Setup(WPS) or PIN Code Setup(WPS) without using
an SSID and password.
"General Settings - Network Settings" on page 103
U
A
Touch on the Home screen.
Note:
The shape and color of the icon differ depending on
the connection status.
"Home screen operations" on page 13
U
B
Touch Router.
C
Touch Start Setup.
Details of the wired LAN connection status are
displayed.
D
Touch Change to Wi-Fi connection., check the
displayed message, and touch Yes.
E
Touch Wi-Fi Setup Wizard.
F
Select the desired SSID.
If the desired SSID is not displayed, touch Search
Again to update the list. If it is still not displayed,
touch Enter Manually and directly enter the
SSID.
G
Touch Enter Password and enter the password.
Note:
❏ Differentiate between uppercase and
lowercase when entering the password.
❏ If the SSID was entered directly, set Password
to Available before entering the password.