Epson SC-F500 Series User Manual page 67

SC-F500 Series User's Guide
C
With the two sheets overlapping, trim the excess
by cutting along the line joining the two cut
guides (the lines to the left of the X marks).
D
Rejoin the two sheets.
Use an adhesive tape to stick the backs of the
sheets together.
E
Repeat steps 1 to 4 for the lower two sheets.
Printing with the Printer Driver from Your Computer
F
Trim the bottom from the upper sheets by
cutting along the line joining the two guides (the
lines above the X marks).
G
Lay the upper sheet on top of the lower sheet.
Lineup the X marks as shown in the illustration
below, and temporarily fasten them using an
adhesive tape on the back.
67