Specifications Table - Epson SC-F500 Series User Manual

SC-F500 Series User's Guide

Specifications Table

Printer Specifications
Printing method PrecisionCore inkjet technology
Nozzle configura- 800 nozzles x 4 colors
tion
(Black, Cyan, Magenta, Yellow)
((Black, Cyan, Magenta, Yellow)
Resolution (maxi- 2400 × 1200 dpi
mum)
Control code ESC/P raster (undisclosed
command), HP-GL/2, HP RTL
Built-in memory 1.0 GB
Rated voltage AC100-240 V
Rated frequency 50/60 Hz
Rated current 1.4 A
Power consumption
Printing Approx. 22 W
Ready mode Approx. 8 W
Sleep mode Approx. 1.6 W
Power off Approx. 0.2 W
Temperature
Printing 10 to 35 ˚C (15 to 25˚C is
recommended)
In storage (Before -20 to 60 ˚C (Within 120 hours at 60
unpacking) ˚C, within a month at 40 ˚C)
In storage (After -10 to 40 ˚C (Within a month at 40
unpacking) ˚C)
Humidity
Printing 20 to 80% (40 to 60% is
recommended. without
condensation)
In storage 5 to 85% (without condensation)
Appendix
Printer Specifications
Temperature and humidity range for operating (the range
shown by diagonal lines is recommended)
Dimensions (Width x Depth x Height)
When printing
Storage
*2
Weight
*1 With the paper basket open
*2 Not including the ink
c
Important:
Use the printer at an altitude of 2000 m or less.
Interface Specifications
USB port for a com-
puter
*1
Ethernet
Standards
Wi-Fi
140
970 x 577 x 245 mm
(When the optional stand is
*1
installed : 970 x 980 x 928 mm)
970 x 577 x 245 mm
(When the optional stand is
installed: 970 x 695 x 928 mm)
Approx. 29 kg
(When the optional stand is
installed: approx. 40 kg)
SuperSpeed USB
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
IEEE802.3az (Energy Efficient
*2
Ethernet)