Minelab F3 Compact Operation Manual page 43

WARNING
THIS DOCUMENT CONTAINS INTELLECTUAL PROPERTY, TECHNICAL AND
PROPRIETARY DATA AND INFORMATION AND OTHER MATERIAL OWNED SOLELY
BY MINELAB ELECTRONICS PTY LIMITED. THIS MATERIAL MUST NOT BE USED
WITHOUT THE PRIOR WRITTEN PERMISSION OF MINELAB ELECTRONICS PTY LTD.
© Minelab Electronics Pty Ltd. All Rights Reserved.
This document is protected by copyright. Apart from any use permitted under the
Australian Copyright Act 1968 (Cth) or other applicable laws, any unauthorised use,
appropriation or reproduction of this document or any part of it is strictly prohibited.
No part of this document may be used or reproduced by any means or by any
process, in any form, without the prior written permission of the copyright owner
Minelab Electronics Pty Ltd of 2 Second Avenue, Mawson Lakes SA 5095, Australia.
COMPLIANCE
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
RADIO AND TELEVISION INTERFERENCE
NOTE: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.