Minelab F3 Compact Operation Manual page 9

Battery Compartment – contains four C cell alkaline or rechargeable batteries. A
battery map is provided to indicate correct alignment of batteries when inserted
into the compartment.
Armrest and Strap – provided for operator comfort when the detector is used for
prolonged periods. The Armrest can be extended for operator comfort.
Test Piece – conveniently stowed on the Armrest to allow the operator to ensure
the detector is working at its operational capability.
Earset Connector — provides connection for the Earset and also the
programming cable when using the configuration software to customise
volume and sensitivity settings.
Main Body — waterproof housing containing the detector electronics and batteries.
Handle Assembly — collapsible handle that also contains Ground Balance/Audio
Reset button, Volume adjustment buttons.
Controls — On/Off and Volume/Sensitivity selection knobs — both controls cannot
be accidentally rotated.
Shaft Hinge — pivot point for unfolding or folding the shafts. The hinge is only
locked in position when the Handle Assembly is in its deployed position.
Upper, Middle, Lower Shafts — carbon fibre shafts that are adjustable for
operator comfort and for changes in demining positions.
Upper and Lower Camlocks — self-cleaning locking mechanisms to secure middle
and lower shafts.
Coil Pivot Assembly — permits the tilt and rotation of the coil and provides a
tension screw for adjustment as required.
Coil — waterproof enclosed coil to eliminate possible interference from vegetation.
Skid Plate — removable cover that protects and prolongs the life of the coil
thereby reducing maintenance costs.
F3 Compact Operations Manual General Description and Preparation | 9