Setting Up The Printer; For A Network-Connected Macintosh; For A Usb-Connected Macintosh - Xerox WorkCentre 3119 User Manual

Install the Scan driver
1
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3
Double-click CD-ROM icon that appears on your
Macintosh desktop.
4
Double-click the MAC_Installer folder.
5
Double-click the MAC_Twain folder.
6
Double-click the Xerox ScanThru Installer icon.
7
Enter the password and click OK.
8
Click Continue.
9
Click Install.
10
After the installation is finished, click Quit.
Uninstalling the Scan driver
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
4
Double-click the MAC_Twain folder.
5
Double-click the Xerox ScanThru Installer icon.
6
Enter the password and click OK.
7
Click Continue.
8
Select Uninstall from the Installation Type and then Click
Uninstall.
9
When the uninstallation is done, click Quit.
28
Using Your Printer with a Macintosh

Setting Up the Printer

Set up for your printer will be different depending on which
cable you use to connect the printer to your computer—the
network cable or the USB cable.

For a Network-connected Macintosh

N : Some printers do not support a network
OTE
interface. Before connecting your printer, make sure
that your printer supports a network interface by
referring to Printer Specifications in your Printer User's
Guide.
1
Follow the instructions on "Installing Software for
Macintosh" on page 27 to install the PPD and Filter files on
your computer.
2
Open Print Setup Utility from the Utilities folder.
3
Click Add on the Printer List.
4
Select the IP Printing tab.
5
Select Socket/HP Jet Direct in Printer type.
WHEN PRINTING A DOCUMENT CONTAINING MANY
PAGES, PRINTING PERFORMANCE MAY BE
ENHANCED BY CHOOSING SOCKET FOR PRINTER
TYPE OPTION.
6
Enter the printer's IP address in the Printer Address
field.
7
Enter the queue name in the Queue Name field. If you
cannot determine the queue name for your printer server,
try using the default queue first.
8
Select Xerox in Printer Model and your printer in Model
Name.
9
Click Add.
10
Your printer's IP address appears on the Printer List, and
is set as the default printer.

For a USB-connected Macintosh

1
Follow the instructions on "Installing Software for
Macintosh" on page 27 to install the PPD and Filter files on
your computer.
2
Open Print Setup Utility from the Utilities folder.
3
Click Add on the Printer List.
4
Select the USB tab.
5
Select Xerox in Printer Model and your printer in Model
Name.
6
Click Add.
Your printer appears on the Printer List, and is set as the
default printer.