Table of Contents
Advertisement
1. Place the neoprene wrap over the wiring, hoses, and control
cables.
2. Fasten clamp together with two screws.
Filling the Fuel System
When starting an engine for the first time, or starting an engine
that ran out of fuel or was drained of fuel, fill and prime the fuel
system.
To fill and prime the fuel system:
1. Squeeze the fuel line primer bulb until it feels firm.
2. Turn the key switch to the "ON" position for three seconds.
This operates the electric fuel pump.
3. Turn the key switch back to the "OFF" position and squeeze
the primer bulb again until it feels firm.
eng
OUTBOARD INSTALLATION
a a
b
7644
111
3766
a -
Screw (2)
b -
Front clamp
Advertisement
Table of Contents
