Table of Contents
Advertisement
2. Insert steering cable into tilt tube.
3. Torque nut to specification.
Description
Nut
Steering Link Rod Fasteners
IMPORTANT: The steering link rod that connects the steering
cable to the engine must be fastened using a special washer
head bolt (P/N 10‑849838) and self‑locking nylon insert locknuts
(P/N 11‑826709113). Never replace locknuts with common nuts
(nonlocking) as they will work loose and vibrate off, freeing the
link rod to disengage.
eng
OUTBOARD INSTALLATION
Nm
47.5
93
3725
3727
lb‑in.
lb‑ft
35
Advertisement
Table of Contents
