PROTOCOLLO MODBUS® MODBUS® PROTOCOL Le centraline di rifasamento della serie DCRJ The DCRJ series Power factor regulators support supportano i protocolli di comunicazione Modbus the communication protocols Modbus RTU® and RTU® e Modbus ASCII® sulle porte seriali RS-232 e Modbus ASCII® on the RS-232 and RS-485 serial RS-485.
For instance, to read the value of the line current, indirizzo 1il valore della corrente di linea che si trova which resides at location 6 (06 Hex) from the DCRJ alla locazione 6 (06 Hex), il messaggio da spedire è il...
If the value is not in the valore impostato non rientri nel valore minimo e correct range, the DCRJ will answer with an error massimo della tabella la DCRJ risponderà con un message. In the same way, if the parameter messaggio di errore.
Page 6
LSB CRC La tabella seguente riporta il significato del byte The following table gives the meaning of the status inviato dalla DCRJ come risposta: byte sent by the DCRJ as answer: SIGNIFICATO MEANING Modo operativo (0=AUT 1=MAN) Oprative mode (0=AUT 1=MAN)
(0D 0A). Esempio: Example: Per esempio, se si vuole leggere dalla DCRJ con For instance, to read the value of the phase-to- indirizzo 8 il valore della tensione concatenata phase voltage, which resides at location 04 (04 Hex)
CALCOLO DEL CRC (CHECKSUM per RTU) CRC CALCULATION (CHECKSUM for RTU) Hex FFFF = CRC Esempio di calcolo: Example of CRC calculation: Frame = 0207h Frame = 0207h CRC xor BYTE = CRC Inizializzazione CRC 1111 1111 1111 1111 CRC initialization 1111 1111 1111 1111 Carica primo byte 0000 0010...
Page 9
TABELLA 2: TABLE 2: MISURE FORNITE DAL PROTOCOLLO DI COMUNICAZIONE MEASURES SUPPLIED BY SERIAL COMMUNICATION PROTOCOL (Utilizzabili con funzioni 03 e 04) (To be used with functions 03 and 04) INDIRIZZO WORDS MISURA MEASURE UNITA’ FORMATO ADDRESS UNIT FORMAT Cosfi attuale Actual cos-phi Unsigned long Tensione...
Page 10
TABELLA 4: TABLE 4: COMANDI COMMANDS (Utilizzabili con funzione 06) (To be used with function 06) INDIRIZZO WORDS FUNZIONE FUNCTION FORMATO ADDRESS FORMAT 3000h Cambio modalita’ operativa Operative mode change Unsigned integer 3001h Unsigned integer Reset apparecchio (warm boot) Device reset (warm boot) 3002h Ripristino a default di tutti param.
Page 11
DCRJ. measure, please see the DCRJ operating manual. Per rendere effettivo un cambiamento nel menu di setup (tabelle 5, 6, 7 e 8) To make effective the changes made to setup parameters (tables 5, 6, 7 and e’...
TABELLA 6: TABLE 6: PARAMETRI SETUP ESTESO ADVANCED SETUP PARAMETERS (Utilizzabili con funzioni 04 e 06) (To be used with functions 04 and 06) INDIRIZZO WORDS PARAMETRO PARAMETER RANGE FORMATO ADDRESS FORMAT P.11 Tipo di collegamento P.11 Type of connection 0…4 1613h Unsigned integer...
Page 13
TABELLA 7: TABLE 7: PARAMETRI SETUP FUNZIONI FUNCTION SETUP PARAMETERS (Utilizzabili con funzioni 04 e 06) (To be used with functions 04 and 06) INDIRIZZO WORDS PARAMETRO PARAMETER RANGE FORMATO ADDRESS FORMAT P.41 Rapporto TV 1 P.41 VT1 Ratio 10…2500 1626h Unsigned integer P.42 Rapporto TV 2...
TABELLA 9: TABLE 9: OROLOGIO DATARIO REAL TIME CLOCK (Utilizzabili con funzioni 04 e 06) (To be used with functions 04 and 06) Per rendere effettivi I cambiamenti, memorizzare le impostazioni utilizzando To make effective the changes, store them using the dedicated command l’apposito commando descritto nella tabella 4.
Page 16
TABELLA 10-1: LISTA EVENTI - CORRISPONDENZA CODICE NUMERICO / TIPO EVENTO TABLE 10-1: EVENT LOG – NUMERIC CODE/ EVENT TYPE CORRESPONDENCE Code Event Evento Auxiliary power on Presenza tensione ausiliaria Auxiliary power off Assenza tensione ausiliaria Switched to MAN mode Passaggio in modalità...
Page 17
TABELLA 11: TABLE 11: SPETTRO ARMINICO FFT FFT HARMONIC SPECTRUM (Utilizzabili con funzione 04) (To be used with function 04) INDIRIZZO WORDS DESCRIZIONE DESCRIPTION RANGE FORMATO ADDRESS FORMAT 1C00h 2^ armonica di corrente harmonic current 0..250% Unsigned integer 1C01h 3^ armonica di corrente harmonic current 0..250% Unsigned integer...
Need help?
Do you have a question about the DCRJ and is the answer not in the manual?
Questions and answers