Wren 600 Adjustable Corner Assembly Manual
Wall unit
Hide thumbs
Also See for 600 Adjustable Corner:
- Assembly manual (12 pages) ,
- Assembly manual (16 pages)
Subscribe to Our Youtube Channel
Related Manuals for Wren 600 Adjustable Corner
Summary of Contents for Wren 600 Adjustable Corner
- Page 1 WALL UNIT 600 Adjustable Corner Assembly Guide For Internal Use: FI.WR.INS.037_WKIN00127_WALL_600_AdjCnr_Rev3.indd...
-
Page 2: Assembly Guide
WALL UNIT BEFORE YOU START 600 Adjustable Corner INSTALLATION Assembly Guide SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel A Panel B Panel C Loose Shelf Blanking Panel Frontal x1 Back Panel... - Page 3 WALL UNIT 600 Adjustable Corner Step 1. Seat (G) Assembly Guide Seat dowel (F) cam dowel into hole as into holes in shown. end panel (B) as shown. Step 2. Seat cam dowel (G) into holes in end panel (B) as shown.
- Page 4 WALL UNIT Step 6. 600 Adjustable Corner Seat dowel (F) Assembly Guide Seat (G) into holes in cam dowel both panels (B) into hole as as shown. shown. Step 7. Seat cam dowel (G) into holes in both end panels (B) as shown.
- Page 5 WALL UNIT 600 Adjustable Corner Step 10. Ensure carcass is Assembly Guide square. Step 11. Slide the back panel clips (T) into the groove of both panels (B) & (C)s. The back panel clips (T) should be evenly spaced as shown and positioned to allow the hanging bracket and corner gussets to be fitted. Onceinplace,tightenscrew....
- Page 6 WALL UNIT Care to be taken. Hanging procedure 600 Adjustable Corner is neccesary for a safe installation. Assembly Guide Step 13. Hanging Brackets steps a,b & c to be carried out on both sides as shown Detail A Detail A...
- Page 7 WALL UNIT Step 16. 600 Adjustable Corner Measure appropriately and attach the 2 x hanging bracket plates onto the Assembly Guide wall screwing through the provided holes into your wall. Screws for fixing to walls are not provided as these vary depending on your wall material and construction.
- Page 8 WALL UNIT Adjustable Corner Post Pack Panel X 600 Adjustable Corner Assembly Guide Panel Y Step 19. Attach Panel (X) to panel (Y) using appropriate fixing. Adapt panels (X) & (Y) where applicable to suit customer kitchen plan. Step 20.
- Page 9 WALL UNIT 600 Adjustable Corner Step 22. Assembly Guide Insert hinges in top & bottom holes as shown. Step 23. Secure hinges by tightening 2 x screws with hinge dowels attached. These are already positioned within the hinges. Step 24.
- Page 10 WALL UNIT 600 Adjustable Corner Assembly Guide For Internal Use: FI.WR.INS.037_WKIN00127_WALL_600_Adj_Cnr_Rev2.indd...
- Page 11 WALL UNIT 600 Adjustable Corner Assembly Guide For Internal Use: FI.WR.INS.037_WKIN00127_WALL_600_Adj_Cnr_Rev2.indd...
Need help?
Do you have a question about the 600 Adjustable Corner and is the answer not in the manual?
Questions and answers