Troubleshooting Reference - Xantrex FREEDOM HF 1000 Owner's Manual

Troubleshooting Reference

ELECTRICAL SHOCK AND ENERGY HAZARD
Do not disassemble the Freedom HF. It does not contain any user-
serviceable parts. Attempting to service the unit yourself could result in
an electrical shock or burn.
Failure to follow these instructions can result in death or serious
injury.
Table 2 Troubleshooting Reference
Problem
Battery charging current is lower than the
charging set point during bulk charge mode.
Alarm does not sound when an error is
encountered.
36
Possible Cause
Ambient (environment) temperature is
high.
Alarm is turned OFF.
Solution
Do not be alarmed, the unit is performing normally. The
charging current automatically de-rates at high ambient
temperature.
Improve ventilation. Make sure the unit's ventilation openings
are not blocked.
Press and hold the Select button for two seconds to disable (or
enable) the audible alarm. See "Display Panel Operation" on
page 14.
Freedom HF Owner's Guide