Introduction - Xantrex FREEDOM HF 1000 Owner's Manual

Introduction

The Freedom HF Inverter/Charger (Freedom HF) is designed with
integrated inverting–charging functions and power management features
suitable for marine, recreational, and commercial vehicle installations.
Please read this chapter to familiarize yourself with the main performance
and protection features of the Freedom HF.
Materials List
The Freedom HF ships with the following items:
• one Freedom HF unit,
• one set of owner's and installation guides and a mounting template,
• one display panel with 7-inch (0.17 m) cable,
• one communications cable (25 feet) (7.5 m),
• two DC terminal covers,
• one strain-relief clamp,
• one GFCI cover plate with knockout,
• one display panel blanking plate (not shown),
• one display panel mounting bezel (not shown), and
• one set of lock washers and nuts (not shown).
NOTE: If any of the items are missing, contact Xantrex or any authorized
Xantrex dealer for replacement. See "Contact Information" on page i.
975-0390-01-01
Freedom HF unit
Product image shown
may vary from actual
product. See Features
for comparisons.
GFCI cover plate
communications cable
Figure 1 What's In The Box
Display panel is
attached to the unit.
strain-relief clamp
DC terminal covers
1