Table of Contents
Advertisement
Getting Started
Hardware configuration of the S7-400 station
1. Select the components listed below and configure them as shown in Figure 3-5.
Rack
Power supply
CPU 416-1
CP 443-1
2. Do not connect the subnet for the CP 443-1.
3. Close with "Save and Compile".
Note
Note the current order number when making a selection.
Figure 3-5
Configuring the Hardware of the S7-400 Station
3-6
Windows Automation Center WinAC Slot 412/WinAC Slot 416 Version 3.1
A5E00065531-03
Advertisement
Table of Contents
