X-Micro WLAN 11g User Manual page 69

5.11.1. To Add a New Static Route:
5.11.1.1. On the Advanced navigation bar, click Routing.
The Static Routing page appears, seen in FIGURE 5-15:
5.11.1.2. Enter the following static route information:
Paramet
Destinati
on LAN
IP
Subnet
Mask
Gateway
Hop
Interface
FIGURE 5-15: Static Routing Page
er
Specifies the network address of the remote
LAN segment. For standard class "C" LANs,
the network address is the first 3 fields of this
Destination LAN IP, the 4th field can be left at
0.
Specifies the Subnet Mask used on the
remote LAN segment. For class "C" networks,
the standard Network Mask is 255.255.255.0.
Specifies the IP Address of the router on the
local LAN segment to which this device is
attached.
Note that it is NOT the router on the remote
LAN segment.
Specifies the number of routers that must be
traversed to reach the remote LAN segment.
Valid values are 1 to 16.
Specifies the interface through which the
router goes to the next hop or a particular
network. Available options are WAN, LAN and
DMZ.
Description