X-Micro WLAN 11g User Manual page 30

4.5.1.2. Type the Old Password in the box. The default password
is 1234.
Note :
Password must be less than 64 characters.
4.5.1.4. Type the new password in the Confirm Password box.
4.5.2. To Restore the Factory Default Configuration:
4.5.2.1. On the Tools page, click Restore to Default next to
Restore Factory Defaults.
The Warning dialog box appears, see FIGURE 4-15:
4.5.2.2. Click OK.
Important:
Restoring the default factory settings will reset all of the router
configurations in every page, so we recommend that you backup the
configuration data from the Gateway to your PC first using DOS
commands. For details, see To Backup or Restore the Configuration Data
Using DOS Commands.
In addition, you can also restore the factory defaults using DOS
commands. For detailed instructions, see To Backup or Restore the
Configuration Data Using DOS Commands.
4.5.3. To Backup or Restore the Configuration Data Using
DOS Commands:
For the backup of the configuration data from the Gateway to your
PC, Gateway acts as a TFTP server.
FIGURE 4-15: Warning Dialog Box
30
4.5.1.3. Type a New
Password in the box.