5.3.1.2. Select an option from the Filtering Page drop-down list:
1~12, 13~24, 25~36.
5.3.1.3. If you select Port Filtering from the Filtering Layer
drop-down list, do the following action:
5.3.1.3.1. Select a traffic direction from the
5.3.1.3.2. Type the start port number and end port
5.3.1.3.3. Select a protocol type from the drop-down
5.3.1.4. If you select Raw IP from the Filtering Layer drop-down
list, do the following action:
FIGURE 5-5: Filters Page
drop-down list: Inbound, Outbound and
Both.
number that you want to allow in the Private
Port Range boxes.
list: TCP, UDP and Both.
48