X-Micro WLAN 11g User Manual page 56

5.5.2.3. Select a line corresponding to a specific ID.
Note :
Make sure you have selected an empty line unless you want to overwrite
an existing application.
Enter the following configuration information:
Paramet
Protocol
Trigger
Port
Range
Maximu
m
Activity
Interval
Session
Chaining
Chaining
FIGURE 5-9: Special Apps Page
er
Specifies the communication protocol used
by the application.
Available options are TCP, UDP and Both.
Range of ports used for outgoing traffic. It
will trigger the Gateway to accept certain
incoming requests.
Maximum number of miliseconds after the
port trigger function, within which incoming
requests will be accepted.
Allows you to select either Enable or Disable.
Specifies whether dynamic sessions can be
chained, allowing multi-session triggering.
Allows you to select Enable or Disable only
56
Description