X-Micro WLAN 11g User Manual page 27

4.4.3.5. Select the default encryption key from the Default TX
Key drop-down list, such as Key 1.
4.4.3.6. When you have completed editing all the settings, click
Apply, or click Cancel to undo your changes.
4.4.4. To Set Wireless Access Control:
4.4.4.1. On the Security Settings page, set the Wireless Access
Control On and click Set Access List.
The Window Control List window appears, seen in FIGURE
FIGURE 4-12: Wireless Control List window
4.4.4.2. Type the MAC addresses that you want to allow to access
the Internet. You can specify up to 80 MAC addresses in the
list.
4.4.4.3. When you have complete editing all the MAC addresses,
click Submit, or click Cancel to undo your changes.
4.4.4.4. Optional. You can click Refresh to see the most current MAC
addresses in effect.
4.4.5. To Review Wireless Status:
4.4.5.1. On the Wireless page, select Status.
The Status page appears with your GateWay's AP Radio
statistics including Status, Max.Mb/s, IP Addr, MAC Addr, Radio
SSID, Receive data and Transmit data. Seen in FIGURE 4-13:
4-12:
27