X-Micro WLAN 11g User Manual page 23

Note :
You can see the default values of the above advanced wireless settings on
the right of the page. If you don't know how to change the settings, please
leave as they are in Figure 4-8:
FIGURE 4-8: Default Values for Radio Settings
4.4.1.6. Optional. If you have enabled Distribution System, type
the physical addresses of distributed client PCs in a wireless
network in the Peer AP MAC Address 1-8 boxes, seen in
FIGURE 4-9:
FIGURE 4-9: Peer AP MAC Addresses for Distribution
4.4.1.7. When you have completed editing all the settings, click
Apply, or click Cancel to undo your changes.
4.4.2. To Set Wireless Security Parameters:
4.4.2.1. Click Security Settings on the Wireless page.
The Security Settings appears, seen in FIGURE 4-10:
Systems
23