X-Micro WLAN 11g User Manual page 57

on UDP
Address
Replace
ment
Address
Translati
on Type
Two
Way
Only
5.5.2.4. When you have completed editing all the settings, click
Apply, or click Cancel to undo your changes.
5.5.3. To Delete Special Applications:
5.5.3.1. On the Special Apps page, for any application you want
to delete, type 0 – 0 in the Trigger Port Range box.
5.5.3.2. Click Apply.
when Session Chaining is enabled.
Specifies whether the session chaining is
allowed on UDP.
Allows you to select Enable or Disable only
when Chaining on UDP is enabled.
Specifies whether binary address
replacement should be performed.
Allows you to select TCP or UDP only when
Address Replacement is enabled.
Specifies whether address translation is
performed on TCP or UDP packets.
Allows you to select either Enable or Disable.
Specifies that a new session is allowed to be
initiated from the same remote host.
57