X-Micro WLAN 11g User Manual page 31

To backup the configuration data, under the DOS window, use the
following command:
tftp –i gateway_Ip_address GET filename
To restore the configuration data, under the DOS window, use the
following command:
tftp –i gateway_Ip_address PUT filename
gateway_Ip_address: The IP address of the Gateway where you
want to back the configuration data.
filename: The file name for backup from the Gateway. It must begin
with "nvram" which is not case-sensitive, such as
"nvram__11032003".
4.5.4. To Reset Gateway:
If you want to reset the hardware, click Reset next to Reset
Gateway on the Tools page.
4.5.5. To Upgrade the Firmware:
4.5.5.1. Download a firmware image file from the Gateway Web
site and save it to your root local drive.
4.5.5.2. Type the file path and file name in the Upgrade Firmware
box, or click Browse to launch a Choose file dialog box, seen in
31