Maintenance - U-Line H-8094 Instructions Manual

A qualified repair technician who is experienced with
the repair of electric tools must perform all repairs and
maintenance recommended in these instructions.
WARNING! Always unplug heat gun before
performing any maintenance or repairs. Use
only the same brand replacement parts.
LUBRICATION
The bearings are lubricated at the factory and require
no further lubrication.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 2 OF 6

MAINTENANCE

CLEANING
Unplug heat gun before cleaning!
To clean the outside of heat gun, use only mild soap
and a damp cloth.
NOTE: DO NOT use other cleaning agents,
turpentine, gasoline, lacquer or paint thinner,
or other solvents that may contain chemicals
which are harmful to plastics and other
insulating materials.
NOTE: NEVER immerse heat gun in liquid or
allow liquid to get inside heat gun. Make sure
all vents and openings are free and clear from
debris.
1-800-295-5510
uline.com
0919 IH-8094