Advertisement
Available languages
Available languages
Quick Links
π
H-8094
DELUXE HEAT GUN
WARNING! This product is a source of very high
temperature. As with any electrical tool always
follow safety precautions to reduce the risk of
fire, electric shock, or any other injury.
WARNING! With a heat gun, as with any other
electrical device, keep a fire extinguisher
handy and observe all sensible fire precautions.
Before performing any application, it is recommended
to experiment with a piece of scrap material.
1.
Plug heat gun into properly rated outlet.
2. Turn switch to "II" position and the heat gun will have
full operating temperature in approximately two
minutes.
3. Adjustable stand is provided and allows nozzle to be
rotated from almost horizontal to vertical position.
PAGE 1 OF 6
1-800-295-5510
uline.com
SAFETY INSTRUCTIONS
1.
OPERATION
Keep the heat gun away from heat, rain, or moisture
exposure to reduce the risk of fire.
2. Do not direct the hot air stream to your clothing,
hands, or any other body parts.
3. Keep away from the reach of children.
4. Keep Nozzle face at least 1" away from shrink wrap
or from work surface.
5. Use heat gun in a well ventilated area.
4. To turn heat gun off after use, move switch to "I"
position. Run on cold for about three minutes. This
will allow the heat gun to cool down and the nozzle
become cool to the touch.
5. After the nozzle cools down, turn switch to "O"
position.
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
0919 IH-8094
Advertisement
Related Manuals for U-Line H-8094
Summary of Contents for U-Line H-8094
- Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. π H-8094 1-800-295-5510 uline.com DELUXE HEAT GUN SAFETY INSTRUCTIONS WARNING! This product is a source of very high Keep the heat gun away from heat, rain, or moisture temperature.
-
Page 2: Maintenance
MAINTENANCE CLEANING A qualified repair technician who is experienced with the repair of electric tools must perform all repairs and Unplug heat gun before cleaning! maintenance recommended in these instructions. WARNING! Always unplug heat gun before performing any maintenance or repairs. Use To clean the outside of heat gun, use only mild soap only the same brand replacement parts. -
Page 3: Instrucciones De Seguridad
π H-8094 800-295-5510 uline.mx PISTOLA DE CALOR DE ALTA CALIDAD INSTRUCCIONES DE SEGURIDAD ¡ADVERTENCIA! Este producto es una fuente Mantenga la pistola de calor lejos del calor, lluvia o de muy alta temperatura. Al igual que ocurre humedad para reducir el riesgo de incendio. -
Page 4: Mantenimiento
MANTENIMIENTO LIMPIEZA Un técnico de reparaciones cualificado que tenga experiencia en la reparación de herramientas ¡Desenchufe la pistola de calor antes de eléctricas deberá llevar a cabo todas las reparaciones limpiarla! y el mantenimiento recomendado en estas instrucciones. Para limpiar el exterior de la herramienta, use ¡ADVERTENCIA! Desenchufe siempre la pistola únicamente un detergente suave y paño húmedo. -
Page 5: Consignes De Sécurité
π H-8094 1-800-295-5510 uline.ca PISTOLET THERMIQUE DE LUXE CONSIGNES DE SÉCURITÉ AVERTISSEMENT! Ce produit peut générer des 1. Afin de minimiser le risque d'incendie, rangez le ARRÊT températures très élevées. Afin de minimiser pistolet thermique à l'abri de la chaleur, de la pluie le risque d'incendie, de choc électrique ou... -
Page 6: Entretien
ENTRETIEN NETTOYAGE Toutes réparations et tout entretien préconisés dans ces directives devront être effectués par un technicien Débranchez le pistolet thermique avant de le compétent ayant préalablement effectué des ARRÊT nettoyer! réparations d'outils électriques. AVERTISSEMENT! Débranchez toujours le Pour nettoyer la partie externe du pistolet thermique, pistolet thermique avant de procéder à...