Figure 2-4 Example Of Redundancy In A 1-Out-Of-2 System With Error; Figure 2-5 Example Of Redundancy In A 1-Out-Of-2 System With Total Failure - Siemens SIMATIC S7-400H System Manual

With error/fault
The following figure shows how a component may fail without impairing the functionality of
the overall system.
Figure 2-4
Failure of a redundancy node (total failure)
The following figure shows that the overall system is no longer operable, because both
subunits have failed in a 1-out-of-2 redundancy node (total failure).
Figure 2-5
S7-400H
System Manual, 03/2012, A5E00267695-11
Example of redundancy in a 1-out-of-2 system with error
Example of redundancy in a 1-out-of-2 system with total failure
Fault-tolerant automation systems
2.2 Increasing the availability of plants
29