Siemens SIMATIC S7-400H System Manual page 189

Library V5.x Library V4.x Library V3.x Module
Distributed: Redundant DO dual-channel
X
X
X
X
X
X
X X
X X
X X
S7-400H
System Manual, 03/2012, A5E00267695-11
X DO8xDC 24 V/0.5 A
A definite evaluation of the diagnostics information "P short-circuit" and "wire
break" is not possible. Deselect these individually in your configuration.
X DO8xDC 24 V/2 A
X DO32xDC 24 V/0.5 A
X DO8xAC 120/230 V/2 A
X DO 4x24 V/10 mA [EEx ib]
You cannot use the module for applications in hazardous areas in redundant
mode.
X DO 4x24 V/10 mA [EEx ib]
You cannot use the module for applications in hazardous areas in redundant
mode.
X DO 16xDC 24 V/0.5 A
The equipotential bonding of the load circuit should always take place from

one point only (preferably load minus).
Diagnostics of the channels is not possible.

X DO 16xDC 24 V/0.5 A
The equipotential bonding of the load circuit should always take place from

one point only (preferably load minus).
X DO 10xDC 24 V/2 A, product version 3 or higher
F module in standard mode
The inputs and outputs must have the same address.
13.4 Connecting redundant I/O to the PROFIBUS DP interface
Using I/Os in S7–400H
Order number
6ES7322–8BF00–0AB0
6ES7322–1BF01–0AA0
6ES7322–1BL00–0AA0
6ES7322–1FF01–0AA0
6ES7322–5SD00–0AB0
6ES7322–5RD00–0AB0
6ES7322–8BH01–0AB0
6ES7322–8BH10–0AB0
6ES7326–2BF01–0AB0
189