Trouble Shooting - Space-Ray COLD BLOCKER WB10CE-N7 Installation And Operation Instructions Manual


Main Burner and Orifice: Check the Main burner and orifice; remove any dirt or debris including spider webs.

Foreign Objects: Check and remove any foreign objects that are logged between the heat shield and the heater.

Ceramic Glass: Clean the glass from the inside and outside using a damp cloth. See also Section 21.1) for safe
removal of glass.

Burner Assembly: The burner assembly is not serviceable. The metal back may be cleaned with a damp cloth,
the ceramic and gaskets must not be disturbed.

IMPORTANT: DO NOT DIRECT AN AIR LINE AT THE CERAMIC PLAQUE SURFACE AS IT MAY DAMAGE THE
CERAMIC TILES OR DISLODGE THE HIGH TEMPERATURE GASKET MATERIAL FROM AROUND THE TILES.

Safety Labels: Replace safety and all other labels if they are no longer visible. See section 24.0) for
replacements.

Wall Tag: Ensure a wall tag has been placed near the heater's thermostat or in a conspicuous area near the
heater. Review the information for accuracy, replace if the information is no longer visible.
20.0)

TROUBLE SHOOTING

Form 44201360
Oct 2019
38