Table of Contents
Advertisement
IMPORTANT: Use the Dome Cap nuts at the control end of the heater as shown in the
illustrations so that the heat shield can expand when the heater is turned on. Failure to do so may result in the heat
shield distorting.
Step 5. Attach the heat shield to the hanger rail using the holes in the heat shield indicated below for horizontal
mounting.
Step 6. Place the new clearance label on the control end of the heater. NO NOT PLACE LABEL ON THE HEAT SHIELD.
See below the correct holes to mount the heat shield to the hanger rail for other installation angles.
Form 44201360
24
Oct 2019
Advertisement
Table of Contents
