Table of Contents
Advertisement
The heat shield position on the heater is dependent on the heater mounting angle. Use the angle gauge provided
with the heater to determine the mounting angle before proceeding with the heat shield assembly. See Section
12.1
See below for installation steps.
Step 1. Use the angle gauge shown below to determine the mounting angle of the heater.
Step 2. Attach the (2) holder brackets to the top of the heater using (2) black oxide #8 screws per bracket.
Step 3. Identify the correct holes to mount the shield hanger rail from the illustration below.
Step 4. Attach the heat shield hanger rail to the holder bracket using (2) black oxide #8 screws on each end.
Horizontal position shown below.
Form 44201360
23
Oct 2019
Advertisement
Table of Contents
