Table of Contents
Advertisement
PN
44560352
Wall / Ceiling Telescopic Mounting
Bracket Kit- 15"-30" overhead
space (check clearances to
combustibles space above the
heater before ordering) includes
both the 380-560mm (15-22") and
560-760mm (22-30")
extension legs.
44566300
Heat
Shield
clearances to combustible option
when installed. Mounting angles
are restricted to 0°, 15°, 30°, 45°
and 60°.
44560599
Column
Mounting
suitable for columns 200mm (8")
and wider.
44560607
75mm (3 ") Pole Mounting Bracket
Kit
44560608
100mm
Bracket Kit
11.0)
UNPACKING THE HEATER
The heater and ceramic glass are shipped separate but in the same box. Care must be taken
when up-packing the heater. Carefully open the top of the heater as indicated on the labels at the side of the
shipping box. An angle gauge is attached to the heater's control side with tape and is needed for installation (see
Section 12.1).
The glass is located on top of the heater and is wrapped in cardboard cradled into the foam end pieces. Carefully
remove the top foam pieces and remove the cardboard wrapped glass. Care must be taken that during handling
the glass does not slide out of the cardboard wrap. Store the glass in a secure location for later assembly.
Form 44201360
Oct 2019
Description
Kit
–
Reduced
Arm
Kit
–
(4")
Pole
Mounting
16
Picture
Advertisement
Table of Contents
