Table of Contents
Advertisement
3.
Do one of the following:
To reset the horizontal angle, enter a value in the HA field and press
–
If you do not need to reset the HA, leave the
–
HA field blank and press
The display returns to the BMS.
Two-point resection along a known line
1.
To enter the Known Line function, press
select
Known Line
2.
Enter a known point as P1.
If you enter a new point name, a coordinate
input screen appears.
Sight P1 and press
measurement. Press
3.
Choose how you want to define a known line:
To define the line by entering P2
–
coordinates, press
To define the line by entering the azimuth,
–
press
4.
If you select
screen appears. Enter the angle value and press
.
[ENT]
A measurement screen appears.
5.
Sight P2 and press
measurement. Press
[ENT]
in the Stn Setup menu.
or
[MSR1]
[MSR2]
.
[ENT]
or select
[1]
or select
By Angle
[2]
, the azimuth input
By Angle
or
[MSR1]
[MSR2]
.
[ENT]
.
or
[7]
to take a
.
By Coord
.
to take a
Nikon N Series/K Series Total Station Instruction Manual
Applications 4
.
[ENT]
65
Advertisement
Table of Contents
