Download Print this page

Attaching A Payload - dji DROP SYSTEM NAV LIGHT EDITION User Manual

For mavic 2 & mavic 2 enterprise

Advertisement

Attaching a Payload

When you're ready to attach your payload, ensure you have
considered the following:
-
The payload does not exceed 1lb/0.45kg.
-
The payload does not contain any dangerous contents.
-
The payload is not too large which may obstruct the
downward vision system.
-
The payload is not too light which can be blown upward into
the propellers of the aircraft.
-
The payload is suspended at least 1m/~3ft away from the
aircraft.
Please be sure to exercise caution and good judgement when
attaching a payload. Do not attach a payload which can cause
serious damage or injury when dropped. If your payload
satisfies the recommendations above, you may continue.
To attach a payload, the payload pin must be in the engaged/
open position. To open the pin, simply press and hold the
manual pin release button. Once the button is released, the
servo will close the pin.
13

Advertisement

loading
Need help?

Need help?

Do you have a question about the DROP SYSTEM NAV LIGHT EDITION and is the answer not in the manual?