IMPORTANT PRECAUTIONS SAVE THESE INSTRUCTIONS • When using a Suspension Elliptical Trainer, basic precautions should always be followed, including the following: Read all instructions before using this equipment. It is the responsibility of the owner to ensure that all users of this equipment are adequately informed of all warnings and precautions. •...
If the user does not follow systems, or any other item should lose power when you perform this test. these grounding instructions, the user could void the Matrix limited warranty. Non-looped (isolated) neutral/grounding means that each circuit must have an individual...
(L x W x H)* 65” x 29” x 69” * Ensure a minimum clearance width of 0.6 meters (24”) for access to and passage around MATRIX equipment. Please note, 0.91 meters (36”) is the ADA recommended clearance width for individuals in wheelchairs.
Page 6
Hardware Hardware Bolt Screw Flat Washer Bolt Screw LCB Communication Pre-installed Extension Power Wire TV Power Console Connect Wires Coax Ground Wire ASSEMBLY COMPLETE Hardware Flat Washer (25mm) Torque Value Flat Washer (19mm) 40 Nm / 29 ft-lb Spring Washer Bolt (20mm) Bolt (35-20mm)
BEFORE YOU BEGIN MOVING THE EQUIPMENT To relocate elliptical, install transport handles as shown. Remove transport LOCATION OF THE UNIT handles before using elliptical. Place the equipment on a level and stable surface away from direct sunlight. The intense UV light can cause discoloration on the plastics. POWER Locate the equipment in an area with cool temperatures and low humidity.
MAINTENANCE WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED? Minimal maintenance and cleaning is required. Adhering to this schedule will extend the life of your machine. HOW DO I CLEAN MY ELLIPTICAL? Clean with soap and water cleaners only. Never use solvents on plastic parts. Cleanliness of your elliptical and its operating environment will keep maintenance problems and service calls to a minimum.