SERVICE SCHEDULE
MAINTENANCE
Check machine for cord damage
Check recovery dome and gasket for damage and
cleanliness
Check brushes – should be clean with no lint or
strings attached
Inspect vac shoe for blockage; remove fibers with
coat hanger, etc.
Check hoses for wear, blockages, or damage
Check handles, switches, and knobs for damage
Run one gallon of water through solution system
Clean out recovery tank, clean float screen and
check float valve to make sure it moves freely
Clean out solution
Clean outside of all tanks and check for damage
Run vac motor for at least one minute to allow motor
to dry
Store with dome off tank to allow the tank to dry
Check all bearings for noise
Check all gaskets for wear and leakage
Check pump pressure; observe spray pattern and
check with gauge if necessary
Check and clean solution screen
Check brush for wear; ensure bristles are not
damaged
Check condition of vac shoe and frame for damage
Check overall performance of machine
Check vac motor carbon brushes
Check belts for wear and replace as necessary
Check cables for fraying
MAINTENANCE-SERVICE SCHEDULE
DAILY
*
*
*
*
*
*
*
*
*
*
*
*
86302100 CLIPPER DUO 10/02/07
WEEKLY
QUARTERLY
*
*
*
*
*
*
*
*
*
*
4-1