Pre-Run Setup - Windsor 10080480 Operating Instructions Manual

Remove electrical cord and literature from recovery
tank. Fill solution tank (see filling instructions).
Plug cord into grounded outlet. NOTE: Be sure
dome is seated on recovery tank, and float shut-
off is installed correctly.
Switch the cleaning mode switch to the desired
process.
A
for the encapsulating Interim Carpet Cleaning
Process.
B
for Deep Extraction.
Adjust handle to comfortable operating position. Tip
machine back by main handle to move to starting
point.
86302100 CLIPPER DUO 10/02/07
OPERATIONS-PRE RUN SETUP
STEP 2
STEP 4
STEP 1
STEP 3
3-7