Table of Contents
Advertisement
Install the muffler 01761 using the appropriate
rubber suspenders.
Do not use silencers not
supplied by TELAIR. Silencers that have not
been specially sized may damage the motor.
4.13
Connecting an External Network Relay
An (optional) relay or change-over switch code
05930 (Fig.28) should be fitted to the vehicle wir-
ing system. Its purpose is to insulate the generat-
ing set when the vehicle is connected to an ex-
ternal electric input network.
Connect the relay (Fig.29) according to the fol-
lowing instructions:
•
Connect the two wires of the 230 V line of the
generating set to the PINS 1 - 3.
•
Connect the user line to the PINS 7 - 9.
Rev. 004
GB
•
Connect the outside line to the PINS 6 – 4.
•
Jumper the PINS 4 – A.
•
Jumper the PINS 6 – B.
•
Connect all the grounding cables together
the generating set should be carried out by
skilled electricians only.
Energy 4010 G
Electric connections to
15
Advertisement
Table of Contents
