Cage Clamp ® Connectors; Table 5: Legend For Figure "Cage Clamp - WAGO 750-453/040-000 Manual

20 Device Description
3.2.3 CAGE CLAMP
Figure 4: CAGE CLAMP

Table 5: Legend for Figure "CAGE CLAMP

Channel
1
2
3
4
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
For further information about shielding, see system manual WAGO-I/O-SYSTEM
750 XTR, section "Connect Devices" > ... > "Shielding."
Manual
Version 1.3.0
®
Connectors
®
Connectors
®
Connectors"
Designation Connector Function
AI 1 1
Common
2
(ground)
AI 2 5
Common
6
(ground)
AI 3 3
Common
4
(ground)
AI 4 7
Common
8
(ground)
WAGO-I/O-SYSTEM 750 XTR
750-453/040-000 4AI 0-20mA S.E. /XTR
Analog input1: Signal
Analog input: Common (ground)
Analog input 2: Signal
Analog input: Common (ground)
Analog input 3: Signal
Analog input: Common (ground)
Analog input 4: Signal
Analog input: Common (ground)