ENTER/EXIT PROGRAMMING MODE
Code 128 Set Length 1
This feature specifies one of the bar code lengths for "
. Length 1 is the minimum label length if in Variable Length Mode, or the first fixed
143
length if in Fixed Length Mode. Length includes the bar code's data characters only.
The length can be set from 1 to 80 characters. See "
detailed programming instructions.
Select Code 128 Set Length 1 Setting
$CC8L1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Code 128 Set Length 2
This feature specifies one of the bar code lengths for "
. Length 2 is the maximum label length if in Variable Length Mode, or the second
143
fixed length if in Fixed Length Mode. Length includes the bar code's data characters
only.
The length can be set from 1 to 80 characters. A setting of 00 specifies to ignore this
length (only one fixed length). See "
gramming instructions.
Select Code 128 Set Length 2 Setting
$CC8L2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
144
GRYPHON™ I GD/GBT/GM4200
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Length 1 = 01 (one character)
Set Length 2" on page 248
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Length 2 = 80 (80 characters)
SYMBOLOGIES
Code 128 Length Control" on page
Set Length 1" on page 247
Appendix D, Keypad
represent-
CANCEL
Code 128 Length Control" on page
for more detailed pro-
Appendix D, Keypad
represent-
CANCEL
for more