Stand Mode/Object Detection Indication (Stand Mode Flash); Stand Mode/Object Detection Sensitivity - Datalogic Gryphon GD4200 Product Reference Manual

SCANNING FEATURES

Stand Mode/Object Detection Indication (Stand Mode Flash)

This operation is useful for indicating when the reader is in Stand Mode. If enabled, the
blue indicator will blink when Stand Mode scanning is active.
$CSMFL00
Stand Mode/Object Detection Indication = Enable

Stand Mode/Object Detection Sensitivity

Sets the sensitivity level for stand mode/object detection wakeup. Choices are low,
medium and high.
$CSMSE00

Stand/Base Detection Sensitivity = Medium
$CSMSE02
ENTER/EXIT PROGRAMMING MODE

Stand Mode/Object Detection Indication = Disable
$CSMFL01
Stand/Base Detection Sensitivity = Low
$CSMSE01
Stand/Base Detection Sensitivity = High
PRODUCT REFERENCE GUIDE
97