Hyundai HSL1500T Wheel Manual page 34

3.12 ACCUMULATOR
The accumulator (Fig. 3.11A) stores system pressure until
it is required to activate the electric auxiliary. The key
must be placed in the "ON" position to operate the electric
auxiliary (engine not running).
The electric auxiliary and stored pressure in the
accumulator can be used to release the hydraulic pressure
in the auxiliary hydraulic system. This is accomplished by
cycling the momentary switch on the LH control a couple
of times (see Fig. 3.11B).
Once this pressure is released the operator can disconnect
the couplers to the attachment from the loader..
CAUTION
3. OPERATION
High Pressure
Accumulator. NEVER
use oxygen or shop air.
1. Do not operate without
sufficient dry nitrogen
gas pressure.
2. Release all pressure
prior to servicing or
disassembly.
3. Read all service and
operator instructions
prior to use.
4. Do not operate beyond
stamped maximum
working pressure.
5. Do not weld or modify
this unit in any way.
C3896
AUXILIARY HYDRAULIC CONTROL
Momentary
Switch
ROPS SIDE
C3015
Accumulator
Fig. 3.11A
SEAT SIDE
Fig. 3.11B
35