Hyundai HSL1500T Wheel Manual page 20

2.14 TWO SPEED CONTROL (NOT
AVAILABLE ON ALL MODELS)
A switch located on the LH steering control lever (Fig.
2.14A) is used to alternately activate the loader's Two-
Speed function. Pressing and releasing the switch will
activate the Hi-speed function. Pressing and releasing the
switch a second time will return the loader to the Low-
speed function.
When the loader ignition is turned to the "OFF" position,
the Two-Speed control returns to the Low-speed function.
An indicator panel is mounted on the LH ROPS post (Fig.
2.14B) to show the operator which function is activated at
any given time. For proper loader operation, always select
the loader speed function which is best suitable for the
existing work environment.
NOTE: Always drive the loader at speeds compatible
with safety, especially when operating over rough ground,
unfamiliar terrain, when crossing ditches or when turning.
2. CONTROLS
ROPS SIDE
C3015
C3907
CONTROL HANDLE
TWO SPEED
HI / LOW
BUTTON
(Not available
on all models)
SEAT SIDE
Fig. 2.14A
Fig. 2.14B
21