Hyundai HSL1500T Wheel Manual page 14

2. CONTROLS
2. 7 LIFT ARM SUPPORTS
For your safety, the loader is equipped with lift arm
supports to be used while performing regular service or
maintenance work.
The lift arm supports, when extended, prevent the lift arms
from dropping if hydraulic pressure is relieved or the
boom controls are accidentally cycled.
To operate the lift arm supports, first remove any bucket or
attachment from the quick - tach, raise the lift arms to full
height and shut OFF the engine. Push the two lift arm
support pin handles located directly in front of the operator
at the top of the operator compartment (Fig. 2.7A) outward
extending the lift arm locking pins (Fig. 2.7B). Slowly
C3135
Fig. 2.7A
lower the lift arms down onto the pins. To retract the
support pins, first lift the lift arms off of the pins before
retracting.
Fully retract the lift arm
IMPORTANT
supports before raising
or lowering lift arms.
Lift Arm Support
C694
C3949
Fig. 2.7B
15