Table of Contents
Advertisement
2.12 QUICK - TACH
The quick - tach, which is standard equipment, allows
changing from one attachment to another quickly without
having to remove bolt or pins.
To operate, lift the locking lever (1) up to completely retract
the locking pins (2) (Fig.2.12A). Tilt the quick - tach frame
forward (Fig. 2.12B) with the bucket tilt cylinders and drive
into the attachment. Retract the bucket tilt cylinders (Fig.
2.12C) which will line up the bottom of the attachment with
the quick - tach lock pins. Shut off the engine.
1
2
C3967
C3966
2. CONTROLS
1
2
Fig. 2.12A
C3964
1
1
Fig. 2.12D
Push the locking lever (1) fully down (Fig. 2.12D) extending
the lock pins (Fig. 2.12E item 2) through the attachment and
securing the attachment.
Before operating the attachment check that the locking pins
are correctly engaged.
WARNING
1
1
Fig. 2.12B
1
2
C3968
After hooking up the
attachment, check to
be sure pins and
locking levers are
correctly engaged.
1
1
Fig. 2.12C
C3965
1
2
Fig. 2.12E
19
Advertisement
Table of Contents
