Hyundai HSL1500T Wheel Manual page 30

3. 8 LIFTING
1. Wheel Equiped Loaders
The loader may be equipped with features to use in lifting
(for example by crane onto a flatbed trailer or a flat car),
for securing, and for extraction (from mud or snow). To
facilitate this requires the optional lifting lugs.
To lift using a crane, first follow the shut - off procedure in
section 3.1-3.
Once this is done, attach properly rated cables, chains or
straps to the lift points (See Fig. 3.7). To prevent marking
the operator guard or chafing of the lifting cable, a lifting
frame should be used.
WARNING
2. Track Equiped Loaders
Track equiped loaders must not be lifted using cab
mounted lifting points.
If it is necessary to lift loader it must be done with a lifting
frame that supports the entire loader under the tracks.
Ensure that this frame is designed to support the operating
weight of the loader.
3. OPERATION
Never lift a loader with the
operator in or on the
machine.
C3937
Lifting Frame
C4395
WARNING
Fig. 3.7
To avoid personal injury, lower
the lift arms, shut off the
engine, raise the seat bar and
cycle the lift arm and bucket
controls to ensure they are
locked. Then, unlatch the seat
belt and exit the loader. Do not
enter or exit with the engine
running unless as specified in
this manual or under specific
service and backhoe operating
procedures.
31