Table of Contents
Advertisement
3. 3 OPERATING TRACK LOADER
4. Travel directly up or down a slope, not across the slope
to prevent tracks from derailing.
5. Avoid operating the loader with one track on a slope and
the other on flat ground or with the edge of the track turned
up against a curb or mound (Fig. 3.3D and Fig. 3.3E). This
can cause the tracks to derail or form cracks in the edge of
the track.
6. Avoid operating or turning on sharp objects such as
jagged rocks or broken concrete. This can cause cuts to the
lug surface of the tracks. (Fig. 3.3F and Fig. 3.3 G).
IMPORTANT
26
3. OPERATION
Check for and remove
debris, rocks, roots, etc.
from the track system on
a daily basis.
C4389
C4386
C4388
C4387
Fig. 3.3D
Fig. 3.3E
Fig. 3.3F
Fig. 3.3G
Advertisement
Table of Contents
