Outdoor Unit Maintenance - Fujitsu FO2416RTJNAA Installation Instructions Manual

R-410a heat pump outdoor units, 16 seer two-stage non-communicating heat pump
Table of Contents

Advertisement

10.1 Outdoor Coil Cleaning
resulting in reduced capacity and efficiency and
increases the temperature of the components that
can reduce their life. Therefore, it is recommended
that the outdoor coil be cleaned at least annually
by a qualified service technician using a non-
or flatten out the fins by spraying the fins from
10.2 Cabinet Cleaning and Care
Annual cleaning of the exterior cabinet is
cloth/sponge to remove dust, mold, and potentially
corrosive contaminants that have collected on the
cabinet. It is also recommended to apply a good
parts annually to protect the finish and to restore
plastic parts.
10.3 Motor Lubrication
The bearings in the outdoor motor are pre-
lubricated by the motor manufacturer and do
lubrication.
10.4 Replacement Parts
Any replacement part used to replace parts
originally supplied on equipment must be the same
as or an approved alternate to the original part
for replacement parts not designed to physically
48

10.0 OUTDOOR UNIT MAINTENANCE

from the inside out is the most effective method of
cleaning the coil. The exterior louver panels and
unit top are easily removable to facilitate the coil

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fo3616rtjnaaFo4816rtjnaaFo6016rtjnaa

Table of Contents