General Information - Fujitsu FO2416RTJNAA Installation Instructions Manual

2.0 GENERAL INFORMATION

WARNING:
Improper installation, or installation not made in
accordance with these instructions, can result
in unsatisfactory operation and/or dangerous
conditions and can cause the related warranty
not to apply.
2.1 Introduction
The information contained in this manual has
been prepared to assist in the proper installation,
operation, and maintenance of the air conditioning
system.
retain this manual for future reference.
2.2 Importance of
Quality Installation
A quality installation is critical to assure safety,
reliability, comfort, and customer satisfaction. Strict
adherence to applicable codes, the information in
this installation manual, the outdoor unit installation
manual, and the thermostat installation manual
instruction manuals before starting the installation.
IMPORTANT: This product has been designed
and manufactured to meet certified AHRI capacity
achieve optimum capacity and efficiency and to
assure reliable operation. Installation of this
installation manual and the charging chart label
affixed to the outdoor unit. Failure to confirm
efficiency and shorten equipment life.
The equipment has been evaluated in accordance
Part 3280.
national, state, and local codes. Latest editions
are available from: "National Fire Protection
02269." These publications are:
• ANSI/NFPA No. 70-(Latest Edition) National
Electrical Code.
4
• NFPA90A Installation of Air Conditioning and
conditioning systems.
control compartment.
2.3 System Sizing and
Selection
Before specifying any heat pump equipment,
a survey of the structure and a heat loss and
heat gain calculation must be made. A heat loss
calculation involves identifying all surfaces and
openings that lose heat to the surrounding air
and quantifying that heat loss. A cooling heat
and determines the amount of heat needed
to be removed. A heat gain calculation also
calculates the extra heat load caused by sunlight
and by humidity removal. These factors must be
considered before selecting a heat pump system to
provide year-round comfort. The Air Conditioning
Contractors of America (ACCA) Manual J method
of load calculation is one recognized procedure for
determining the heating and cooling load.
After the proper equipment combination has
been selected, satisfying both sensible and
latent requirements, the system must be properly
installed. Only then can the system provide the
There are several factors that installers must
consider.
• Outdoor unit location
•
• Proper equipment evacuation
• Supply and return air duct design and sizing
• Refrigerant charge
• System air balancing
• Diffuser and return air grille location and sizing
IMPORTANT:
best practices for installation. Installation
and commissioning of this equipment is to
professionals. For technical assistance, contact
your Distributor Service Coordinator.
Excessive use of