#
1
2
4
5
•
Assemble the phone as described in 2 Reassembly
3/000 21-1/FEA 209 544/84 B
SonyEricsson Mobile Communications AB
Figure
fig 3.14.1
fig 3.14.2
fig 3.14.4
fig 3.14.5
Working Instructions, SP/Mechanical
Instruction
Remove the four screws at the
arrows.
(fig 3.14.1)
Remove the dust gasket, inside
the new front, with a pair of
tweezers. Make sure no dust,
particles or adhesive remains
on the glass.
(fig 3.14.2)
Place the front over the frame.
(fig 3.14.4)
Mount the screws, with
washer, in the order 1 to 4.
(fig 3.14.5)
Note
Use screwdriver, torx no 6.
Removed screws cannot be
reused and must be
scrapped
Be careful not to scratch
the inside of the window
with the pair of tweezers.
Very important: Check for
dust inside the phone
before assembling the
front.
Use air blow equipment
Use Torque screwdriver
torx no 6 set to 20 Ncm
Screw until the torque is
reached.
Removed screws cannot be
reused and must be
scrapped.
32(34)